Full Body Decals for Yamaha MT 15
Original price was: ₹4,199.00.₹3,199.00Current price is: ₹3,199.00.
Product description
Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS:Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.
Features
Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water.
Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go.
Wrap a soft, lint free cloth around your squeegee.
Spray the plastic you are going to work on first with water. Coat the entire outside surface.
Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal.
Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end.
Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit.
Guarantee safe & secure checkout
Description
Full Body Decals for Yamaha MT 15
Product description
Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS: Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.
Features
Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water.
Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go.
Wrap a soft, lint free cloth around your squeegee.
Spray the plastic you are going to work on first with water. Coat the entire outside surface.
Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal.
Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end.
Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit.
Additional information
| Weight | 1 lbs |
|---|---|
| COLOUR | 1, 2, 3, 4, 5 |
Quick Comparison
| Full Body Decals for Yamaha MT 15 remove | Heavy Duty Bungee Cord with Hooks Elastic Rope for Bike Luggage Tying Luggage Strap Elastic Rope Multicolor 1 Pcs remove | Rim Sticker for R15 remove | RGB Tail Light For Yamaha MT 15 remove | Eye Sticker for MT-15 remove | Frame Sliders For R15 V3/MT-15 Regular remove | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Full Body Decals for Yamaha MT 15 remove | Heavy Duty Bungee Cord with Hooks Elastic Rope for Bike Luggage Tying Luggage Strap Elastic Rope Multicolor 1 Pcs remove | Rim Sticker for R15 remove | RGB Tail Light For Yamaha MT 15 remove | Eye Sticker for MT-15 remove | Frame Sliders For R15 V3/MT-15 Regular remove | ||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||
| SKU | 80393 | 9031899 | 80520 | 80409 | 80414 | 80468 | ||||||||||||||||
| Rating | ||||||||||||||||||||||
| Price | Original price was: ₹4,199.00.₹3,199.00Current price is: ₹3,199.00. | Original price was: ₹350.00.₹100.00Current price is: ₹100.00. | Original price was: ₹699.00.₹399.00Current price is: ₹399.00. | ₹1,999.00 | Original price was: ₹599.00.₹349.00Current price is: ₹349.00. | ₹599.00 | ||||||||||||||||
| Stock | ||||||||||||||||||||||
| Weight | 1 lbs | 1 lbs | N/A | 1 lbs | 1 lbs | 1 lbs | ||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||
| Additional information |
|
|
|
|
|
| ||||||||||||||||
| Description | Product description Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS: Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.Features Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water. Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go. Wrap a soft, lint free cloth around your squeegee. Spray the plastic you are going to work on first with water. Coat the entire outside surface. Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal. Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end. Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit. | FeaturesCompatibility- R15 Dustproof, aging resistant, weather resistant Easy to install and disassemble, easy to maintain | 7 Colour In 1 Light WATTS : 18 Brand Name : Shark Power Product name : Motorcycle Taillight Material : Plastic +LED Fit for : Yamaha MT 15 Color : Colorful Quality : High-Quality Packing : Box | Features Vehicle Compatibility: - Yamaha MT-15 HIGH QUALITY & SELF ADHSIVE YOU CAN LAY THIS BY YOUR SELF & ITS JUST PEEL AND STICK NOT FADDED, NOT EASY TO FALL OFF | Time to protect your vehicle from Crash.This frame slider is especially made for R15 V3 / MT15 . that lowers the force of the impact during an accident or crash.This frame slider is designed and built after complete R&D by our team.This Product is sporty design and add aesthetic touch to your Ride Soul | |||||||||||||||||
| Add to cart |
Reviews
There are no reviews yet.